Camera Lens Repair Tips
By : Syahrul Fitri
The E18 error or lens error is the most commonly problem when using Digital cameras. The camera beeps a few times and the LCD displays either "e18" or "lens error, restart camera" message in the corner of the screen. Here are
Camera Lens Repair Tips to solve that problem.
If you are in warranty, don't go to a store or
Camera Lens Repair center, call the manufacturer first. Most places will just send it to the manufacturer and then charge you more than what the manufacturer would charge.
If your camera is out of warranty, repair it yourself only, or if the manufacturer refuses to repair it for free, which may happen if, for example, they decide the damage was caused by abuse or neglect. This some step
First, check the battery , make sure your camera has fresh batteries . Remove the batteries from the camera, wait for a moment, then put them back in and turn the camera on. With a fine tip blow off gun and dry compressed air (20 lbs) set the tip between the lens turret and the
camera body and turn on the air while moving the tip around the lens. Try compressed air. It should remove all dust and sand. Turn the camera on and it should function fine.
Other way Try forcing the camera lens. Turn off the camera. Place it on the back with the lens facing up and take a look at the spacing between the lens and the lens housing. The problem should be easy to fix. If you notice that the gap is not even all the way around the lens. This occurs if the camera was dropped while the lens was extended.
Simply press down the lens on the side where the gap is the biggest. You should hear a click as it pops back into place. On the edge of a table and press the lens back towards the center. If the lens is stuck at an angle, put the edge of the lens not the flat front. It will either click back in place and work or it will break off one of the three pins that ride in the grooves of the lens barrel. Try
powering the camera back on.
Or you can Turn off the camera. With the other gently take one part of the lens and gently move it round in a circular movement .Take the camera in one hand and. Do so with both sections of the lens. You will hear a click as it pops back in place. Power the camera on. Or you with the other gently take one part of the lens and gently move it round in a circular movement
I hope this
Camera Lens Repair tips can solve your problem
I thought you might be interested in this article: wedding photo frame and camera lens repair
Copyright 2010 digitalcameraprinters.us
Digital Camera Printers |
Privacy Policy |
Contact Us |
Sitemap